{"title":"Adhesives \u0026 Primers","description":"\u003cp\u003eThe adhesives that match the floors we sell: MS003 primer for concrete and plywood, MS001 and MS009 pressure sensitive adhesives for luxury vinyl plank, tile and sheet, MS007 for high-moisture slabs and demanding commercial rooms, and MS011 urethane with a moisture vapor membrane for engineered hardwood. Four gallon pails, zero or low VOC, priced direct.\u003c\/p\u003e","products":[{"product_id":"msi-engineered-wood-adhesive-ms011","title":"MSI Engineered Wood Adhesive MS011","description":"\u003cp style=\"margin:0 0 1.5em 0;\"\u003eA one-component urethane that bonds the floor and controls moisture in the same pass, \u003cstrong\u003eMSI Engineered Wood Adhesive MS011\u003c\/strong\u003e is the adhesive for glue-down engineered hardwood over concrete, plywood, OSB, terrazzo, ceramic tile and well-bonded vinyl. Spread as a membrane it is rated by MSI to 99 percent relative humidity from below, and its elastomeric bond moves with the wood through the seasons instead of fighting it.\u003c\/p\u003e\u003cp style=\"margin:0;\"\u003eThe working time is a generous 180 minutes, so a long run can be laid without racing the trowel, and the floor takes light traffic in six to eight hours. Coverage depends on the plank and the method: about 30 to 35 square feet per gallon as a membrane under engineered up to 5\/8 inch, and 40 to 50 as adhesive only. It contains no water and is low in VOC. Use it with the engineered hardwood in the Citadel Spaces range; it is not a membrane for solid wood.\u003c\/p\u003e\u003cul style=\"margin:1.5em 0 0 0;padding-left:1.2em;\"\u003e\n\u003cli\u003e4 gallon pail; one-component moisture-cure urethane, no water\u003c\/li\u003e\n\u003cli\u003eMembrane method: 30 to 35 sq ft per gal for engineered up to 5\/8 in (1\/4 x 1\/4 V-notch); adhesive only: 40 to 50 sq ft per gal\u003c\/li\u003e\n\u003cli\u003eWorking time 180 minutes; light traffic 6 to 8 hours, heavy 8 to 12; 99 percent RH, pH 10 to 12\u003c\/li\u003e\n\u003cli\u003eSold by the pail\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MSI","offers":[{"title":"4 Gallon","offer_id":67677538648297,"sku":"XLVTEWADH-4G","price":152.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/5712\/5865\/files\/engineered-wood-adhesive-k.jpg?v=1791964942"},{"product_id":"msi-lvt-universal-pressure-adhesive-ms001","title":"MSI LVT Universal Pressure Adhesive MS001","description":"\u003cp style=\"margin:0 0 1.5em 0;\"\u003eThe everyday glue-down adhesive, \u003cstrong\u003eMSI LVT Universal Pressure Adhesive MS001\u003c\/strong\u003e (MSI's Resilient Adhesive) is a light-colored, solvent-free pressure sensitive adhesive for luxury vinyl plank and tile, sheet vinyl, VCT and carpet tile, and it is the adhesive MSI names for its MitiTec underlayment. Zero calculated VOC and ultra-low odor make it the one to use in a lived-in home or an occupied building.\u003c\/p\u003e\u003cp style=\"margin:0;\"\u003eSpread with a 1\/16 inch U-notch trowel it covers about 220 to 260 square feet per gallon, roughly 880 to 1,040 square feet to the pail; it dries to the touch in 30 to 60 minutes on non-porous substrates and then takes the plank with a permanent, tenacious bond. An antimicrobial system resists mold and mildew in the adhesive layer. Rated for concrete up to 90 percent relative humidity on or above grade; prime porous substrates with MS003.\u003c\/p\u003e\u003cul style=\"margin:1.5em 0 0 0;padding-left:1.2em;\"\u003e\n\u003cli\u003e4 gallon pail; about 220 to 260 sq ft per gal with a 1\/16 x 1\/32 x 1\/32 in U-notch trowel\u003c\/li\u003e\n\u003cli\u003eZero calculated VOC (SCAQMD 1168), ultra-low odor; light-colored, solvent-free\u003c\/li\u003e\n\u003cli\u003eConcrete up to 90 percent in-situ RH on or above grade; permanent bond on vinyl, releasable on carpet tile\u003c\/li\u003e\n\u003cli\u003eFloorScore and Greenguard certified; sold by the pail\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MSI","offers":[{"title":"4 Gallon","offer_id":67677540090089,"sku":"XLVTUPADH-4G","price":172.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/5712\/5865\/files\/universal-pressure-sensitive-adhesive.jpg?v=1791964952"},{"product_id":"msi-lvt-universal-pressure-adhesive-ms009","title":"MSI LVT Universal Pressure Adhesive MS009","description":"\u003cp style=\"margin:0 0 1.5em 0;\"\u003eFor the wettest slabs a glue-down floor can go over, \u003cstrong\u003eMSI LVT Universal Pressure Adhesive MS009\u003c\/strong\u003e is a solvent-free, aggressive-tack adhesive rated by MSI for bare concrete up to 99 percent in-situ relative humidity on or above grade. It bonds luxury vinyl tile and plank, vinyl sheet, VCT and non-vinyl-backed carpet tile, and it carries an antimicrobial system in the adhesive itself.\u003c\/p\u003e\u003cp style=\"margin:0;\"\u003eOn vinyl it forms a permanent, tenacious bond; on carpet tile it stays releasable. It dries to the touch in 30 to 60 minutes on non-porous substrates and allows up to four hours of working time after, and a pail covers roughly 880 to 1,040 square feet at 220 to 260 square feet per gallon. Keep foot traffic off for 24 hours and rolling loads off for 72, and always run a bond test first.\u003c\/p\u003e\u003cul style=\"margin:1.5em 0 0 0;padding-left:1.2em;\"\u003e\n\u003cli\u003e4 gallon pail; about 220 to 260 sq ft per gal with a 1\/16 x 1\/32 x 1\/32 in U-notch trowel\u003c\/li\u003e\n\u003cli\u003eConcrete up to 99 percent in-situ RH on or above grade (sheet vinyl to 90 percent); not below grade\u003c\/li\u003e\n\u003cli\u003eDry to the touch in 30 to 60 minutes; up to 4 hours working time; antimicrobial system\u003c\/li\u003e\n\u003cli\u003eFloorScore certified; residential and light commercial; sold by the pail\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MSI","offers":[{"title":"4 Gallon","offer_id":67677541499113,"sku":"XLVTNUPADH-4G","price":208.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/5712\/5865\/files\/universal-pressure-sensitive-adhesive-hmc.jpg?v=1791964962"},{"product_id":"msi-lvt-high-moisture-adhesive-ms007","title":"MSI LVT High Moisture Adhesive MS007","description":"\u003cp style=\"margin:0 0 1.5em 0;\"\u003eThe adhesive for the demanding floor, \u003cstrong\u003eMSI LVT High Moisture Adhesive MS007\u003c\/strong\u003e (MSI's Transitional Adhesive) is a high-strength, high-shear bond for vinyl plank and tile, solid vinyl tile, sheet vinyl, cork and non-PVC-backed carpet tile. It is the pick where the slab runs damp, since MSI rates it for bare concrete up to 95 percent in-situ relative humidity, and where the room will see hard use: kitchens, hospitality, schools and healthcare floors.\u003c\/p\u003e\u003cp style=\"margin:0;\"\u003eIt grabs with a strong initial tack that firms into a water-resistant bond, dries to the touch in about 30 minutes on non-porous substrates, and gives up to two hours of working time after that. Zero calculated VOC and low odor suit an occupied building, and a pail covers roughly 880 to 1,040 square feet at the published 220 to 260 square feet per gallon with a 1\/16 inch U-notch trowel. Prime first with MS003 on porous substrates and always run a bond test.\u003c\/p\u003e\u003cul style=\"margin:1.5em 0 0 0;padding-left:1.2em;\"\u003e\n\u003cli\u003e4 gallon pail; about 220 to 260 sq ft per gal with a 1\/16 x 1\/32 x 1\/32 in U-notch trowel\u003c\/li\u003e\n\u003cli\u003eConcrete up to 95 percent in-situ RH; dry to the touch in about 30 minutes; up to 2 hours working time\u003c\/li\u003e\n\u003cli\u003eZero calculated VOC (SCAQMD 1168), low odor; residential and commercial\u003c\/li\u003e\n\u003cli\u003eFloorScore certified; sold by the pail\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MSI","offers":[{"title":"4 Gallon","offer_id":67677542416617,"sku":"XLVTHMADH-4G-N","price":208.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/5712\/5865\/files\/multi-use-adhesive.jpg?v=1791964972"},{"product_id":"msi-lvt-concrete-primer-ms003","title":"MSI LVT Concrete Primer MS003","description":"\u003cp style=\"margin:0 0 1.5em 0;\"\u003eThe first coat of a glue-down vinyl floor, \u003cstrong\u003eMSI LVT Concrete Primer MS003\u003c\/strong\u003e is a water-based acrylic primer rolled or sprayed over concrete, flooring-grade plywood, patch and gypsum-based substrates before an MSI adhesive goes down. It seals dry, porous surfaces so the adhesive spreads further and bonds evenly, and it shields the adhesive from the alkalinity of concrete.\u003c\/p\u003e\u003cp style=\"margin:0;\"\u003eOne coat does it: 350 to 400 square feet per gallon with a 3\/8 inch nap roller or 400 to 500 with a sprayer, dry in about four hours, with zero calculated VOC and ultra-low odor for occupied buildings. MSI designs and warrants it for use with its own adhesives, over concrete up to 85 percent relative humidity. It is not a moisture sealer and does not encapsulate old cutback residue.\u003c\/p\u003e\u003cul style=\"margin:1.5em 0 0 0;padding-left:1.2em;\"\u003e\n\u003cli\u003e4 gallon pail; one coat; 350 to 400 sq ft per gal rolled, 400 to 500 sprayed\u003c\/li\u003e\n\u003cli\u003eDry in a minimum of 4 hours; zero calculated VOC (SCAQMD 1168), ultra-low odor\u003c\/li\u003e\n\u003cli\u003eConcrete up to 85 percent in-situ RH, surface pH up to 12; use only with MSI adhesives\u003c\/li\u003e\n\u003cli\u003eFloorScore certified; sold by the pail\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MSI","offers":[{"title":"4 Gallon","offer_id":67677543071977,"sku":"XLVTCONPRI-4G","price":96.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/5712\/5865\/files\/concrete-floor-primer.jpg?v=1791964981"}],"url":"https:\/\/citadelspaces.com\/collections\/adhesives-primers.oembed","provider":"Citadel Spaces","version":"1.0","type":"link"}